linux.samba
[Top] [All Lists]

Re: [Samba] smb_proc_readdir_long - ls not showing files

Subject: Re: [Samba] smb_proc_readdir_long - ls not showing files
From: Doug VanLeuven
Date: Fri, 29 Jul 2005 12:30:42 +0200
Newsgroups: linux.samba
Paul Warner wrote:
-----Original Message-----
From: samba-bounces+pw277=cam.ac.uk@xxxxxxxxxxxxxxx
[mailto:samba-bounces+pw277=cam.ac.uk@xxxxxxxxxxxxxxx]On Behalf Of Paul
Warner
Sent: 27 July 2005 12:37
To: samba@xxxxxxxxxxxxxxx
Subject: [Samba] smb_proc_readdir_long - ls not showing files


Hello,

We are getting a baffling problem with a samba mounted drive on Redhat, mounted from a windows box. We cannot always see files in the mounted directory with ls or perl. The directory has 237 files in it. We sometimes see 197 files with ls. Sometimes we see nothing. This can happen from one try to the next (i.e. run ls, see the files, immediately run ls again and see nothing). We have searched the web, and searched the samba lists, but have not found an answer (although we have found postings about the same problem). We have tried adding a new file to the windows directory - then we can see the files! But delete the file in windows and suddenly we cannot see anything in the linux mount. We have found files that can break it as well, i.e., add the file in windows and you suddenly see no files at all in the linux mount. But it is not a specific file, since the same file with a different name will not cause a problem, or if you
load the files in a different order the behavior can change as well.

The directory contains files with very long names, such as:
"Bullying and Harassment- Fostering dignity at work and managing complaints.doc"

We are running Redhat Linux 9, and Redhat Enterprise Linux 3. We have the same problem on both systems, and in fact one of our colleagues observes the same problem on Suse 9.3 (with the 2.6 kernel). The windows box is running Windows
2003 Server.  Our samba is version 3.0.14a.

dmesg output when we have the problem:
smb_proc_readdir_long: name=, result=-2, rcls=1, err=123

samba mount command:
mount -t smbfs -o
username=user,password=xxxx,gid=501,dmask=775,workgroup=internal
//windowsserver/doc /mnt/doc

This problem has broken an important perl script for us. Hopefully someone on the list can provide the answer, or point us to the place to get the answer.

Thanks,
Paul



Hi again,

I posted this email (above) a few days ago, and haven't received a reply.  I'm
not sure if it went through properly to the list or not, so I'm resending it.
If no one really has an idea or an answer - should I post this as a samba bug?

Thanks,
Paul
Hi,
Reply quoted  rom a previous post about smbfs:
"Oops. This is a General Motors dealership, we do not do Ford warranty work."

With that said, smbfs is a Linux kernel driver that is not part of Samba.
smbfs has been superceded by cifsfs in the 2.6 kernel. Suggest you update and
if you still have trouble contact with the cifsfs developers. You might also
check the CIFSFS Home page at:
         http://us1.samba.org/samba/Linux_CIFS_client.html

I don't personally use smbfs mounted drives.  But I have this in my archives.

Regards, Doug

--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/listinfo/samba

<Prev in Thread] Current Thread [Next in Thread>
Privacy Policy